This 2004 Honda CRV gearbox cannot shift normally, and there is also a drive slip phenomenon. If it is disassembled for repair, the labor cost is not cheap and it takes too long! The owner usually likes to research, so he was very lucky to find a gearbox dismantled car parts of the same model of an accident car with only 20,000 miles on the Internet. After the replacement, the car drives very smoothly and powerfully, just like a new car. ✈️
It is not that the assembly needs to be replaced when the gearbox is faulty, but the cause of the fault must be accurately determined first, whether it is a problem with the electronic control system or a mechanical wear problem. If the labor cost and accessories cost of the repair are too high, then you can find a second-hand gearbox assembly for replacement. The overall repair cost is controllable and the time is relatively short. 🛻The cause of many gearbox failures is that the gearbox oil is too dirty and not replaced on time, resulting in the solenoid valve electronic control jamming. Another reason is that the gearbox leaks slowly for a long time, resulting in incorrect oil level and causing gearbox operation failure. 🚗So the premise of determining the maintenance plan is to accurately find the cause of the fault. For newer cars, it is recommended to go to the brand dealer for inspection; for older cars, it is recommended to go to a professional transmission shop for inspection and judgment, which can actually control the overall maintenance costs. Try to avoid randomly finding an unknown auto repair shop to judge the cause, and avoid blindly believing and arbitrarily deciding the maintenance plan, which will cause unnecessary economic losses!
